Construction guide for Welmax Tile Grout

CONSTRUCTION SURFACE PREPARATION

- Surface before construction must be cleaned of dirt, grease, moss and other impurities. Keep tile groove free from stagnation of water or other liquid.
- Surface should not be too dry but have a certain humidity before application.
Construction tools must be clean.

PRODUCT MIXING OPERATION

- It is recommended to slowly pour the adhesive into water to prevent clumping with the ratio of 0.1kg/300ml of clean water.
- Mix well to get rid of any clumps, then leave for 3-5 minutes to wait for the additives chemical reaction, mix again until the adhesive is plastical enough then apply.

PRODUCT APPLICATION

- Use a steel or specialized rubber scraper to fill the tile groove, when it is full, customized tile groove can be made. 
- Use a sponge or soft cloth to clean the tile immediately after applying.

NOTE WHEN USING

- For tile and stone with rough surface, it is necessary to check the ability to clean the surface before construction.

PRODUCT PRESERVATION

- Store in a dry place, do not place directly on the floor, do not stack more than 5 boxes. Expiry date: 12 months.

Bình luận
Nội dung này chưa có bình luận, hãy gửi cho chúng tôi bình luận đầu tiên của bạn.
VIẾT BÌNH LUẬN